Item |
Prices (subject to change) | CC Prices (subject to change) |
---|---|---|
Stick Grip Assembly Sets — we ship anywhere in the world ! |
||
Stick grip — Right-Hand ( YES, they come with all the switches installed and pre-wired ! ) | $225.00 | $234.00 |
Rush Order | $275.00 | $286.00 |
Stick grip — Left-Hand ( YES, they come with all the switches installed and pre-wired ! ) | $225.00 | $234.00 |
Rush Order | $275.00 | $286.00 |
Threaded Bottom for War Bird Sticks ( Yes, custom pre-wired Right or Left hand, with 1.5″ OD x 18 thread ! ) |
$325.00 | $338.00 |
Rush Order | $375.00 | $390.00 |
Accessories / Parts — we ship anywhere in the world |
||
Spacer — 3/4″ ID x 1″ OD x 2.125″ long for Lancair 320’s, 360’s & older Legacy’s { new Legacy’s now have 1″ stick tubes } made from 6061-T6 material ( click on 3/4″ for a CAD *.PDF of the spacer) | $20.00 | $20.80 |
Spacer — LONG 3/4″ ID x 1″ OD x 2.875″ long with full length slot for side sticks such as for Canards, and for Lancair IV’s and ES’s made from 6061-T6 material ( click on 3/4″ for a CAD *.PDF) | $25.00 | $26.00 |
Spacer — 7/8″ ID x 1″ OD x 2.125″ long for Van’s RV-10’s, RV-12’s, RV-14’s, Glasair’s, Glastar’s, Rotoway’s, F-1 Rocket’s and Expresses; and for the RV-4, 6, 7, 8, & 9 co-pilot made from 6061-T6 material ( click on above for a CAD *.pdf ) | $20.00 | $20.80 |
Custom Spacer(s) — to fit 1-1/8″, 1-1/4″ or Other stick tube OD’s ( these are mfg. one-at-a-time ) made from 6061-T6 material Click here for installation instructions. | $75.00 | $78.00 |
Stick Grip Pivot Spacers(s) — to fit 0.875″ OD and 1.00″ OD, and larger OD, stick tube ID’s ; made from 6061-T6 material | $75.00 | $78.00 |
Cable – Extra 17-conductor, 19 strands per conductor, mil spec Cable bundle Note: Stick Grip(s) already come pre-wired with ~2.5 feet / ~76.2 cm of cable coming out the bottom of each Stick Grip. Extra cable ordered will be added equally to each Stick Grip ordered ( price per foot ) |
$3.50 | $3.65 |
Push-button switches ( 3 kinds ) Extra/Replacement — click here for switch dimensions ON/OFF ( P/N: 36 ), and Normally Open (N.O.) ( P/N: 32NO ) & Normally Closed (NC) ( P/N: 32NC ) Momentary Push-buttons ; all rated at 6 AMP’s @ 12 VDC / 3 Amp’s @ 28 VDC ; SPDT ; 40K operations with a crisp tactile ‘click’, has the proper pre-travel and ounces of force, and does *NOT* turn ON ( make contact ) until the switch ‘no kidding’ clicks ! |
$15.00 | $15.60 |
Toggle switches ( 5 kinds ) Extra/Replacement — click here for switch dimensions ON/NONE/ON ( P/N: ST1-1 ) ; ON/OFF/ON ( P/N: ST1-2 ) ; (ON)/OFF/(ON) ( P/N: T37 ) ; ON/OFF/(ON) ( P/N: T38 ) ; and ON/OFF ( P/N: 1055 ) Toggle Switches ; all rated at 6 AMP’s @ 12 VDC / 3 Amp’s @ 28 VDC ; SPDT ; 40K operations |
$15.00 | $15.60 |
4-way switches with non-corrosive flux already on pins for easier soldering and specs – Extra/Replacement. Note: when you order a 4-way switch for our Stick Grips, the China Hat is glued on. If you do not want that, just let us know in advance. | $25.00 | $26.00 |
China Hats Extra/Replacement | $1.00 | $1.05 |
Colored Caps Extra/Replacement Std. colors: red, black, light blue and green — click here for Cap dimensions We also have orange, grey, yellow, and bone white |
$ 1.50 | $ 1.60 |
Relay Deck six, 10 AMP each ( please specify 12, 24 or Combo VDC ) for Pitch Trim, Roll Trim and Flaps ( or Speed Brakes ) ; OR — for Pitch, Roll, and Rudder Trims ; OR — for any other reversing motor relay needs ; click here for Relay Deck Wiring Schematic ( circuit board is only ~0.88″H X 4.0″W X 5.6″L, and weighs only 5.5 oz. ) |
$138.50 | $144.00 |
Relay Deck, Single two, 10 AMP / 12 VDC each relay’s for Pitch Trim, Roll Trim, Flaps ( or Speed Brakes ) or Rudder Trim ; OR — for any other reversing motor relay needs; click here for Single Relay Deck Wiring Schematic ( circuit board is only ~0.88″H X 4.0″W X 2.0″L, and weighs only 2.0 oz. ) |
$53.85 | $56.00 |
Flap Relay, Radio Shack Catalog # 275-218 | $17.20 | $18.00 |
Flap Relay Socket, Radio Shack Catalog # 275-220 | $5.40 | $5.65 |
Trim Relay, Radio Shack Cat. # 275-249, click here for schematic for Alex Strong Pitch Trim | $10.75 | $11.20 |
Black stick tube Base Boot to cover the hole in the cockpit floor ( not big enough to cover the hole in the RV-8 co-pilot cockpit floor ) ; Base Boot height — approx. 8″ tall ; and the Base Boot rectangular frame dimensions are : Outside rectangular dimensions — 5.25″ x 6.375″ Thin Chrome Stainless Steel Flange — 0.6″; fits 0.75″ to 1.25+” OD stick tubes |
$25.00 | $26.00 |
Stick Grip Sock ( 1 comes with each Stick Grip ) Extra/Replacement To protect your Stick Grip from dust while building, and from the elements after you’re done building, & between each flight |
$1.00 | $1.05 |
Modified 5/16″ x 1/4″ Drive deep/long Socket to remove nuts holding switches in place | $10.00 | $10.40 |
7/64″ Allen Wrench Screw Driver to remove Allen screws to split your Stick Grips in half; Ball Nose Allen Wrench with a nice non-slip rubbery handle grip. | $10.00 | $10.40 |
Lever-Lock Toggle Switch to select between Pilot and Co-Pilot Stick Grips of which one is armed; can also be used for a Flap Switch, Speed Brake(s) Switch, or as a MAG Switch ( P/N : 633-2205 ) | $20.00 | $20.80 |
Flaps or Speed Brake UP or DN Limit Switch for UP and DN indication ( IA P/N 23AC2 UP and DN switch click here for a *.pdf drawing with specs ) SPDT NO and/or NC, Rod Actuator with 4-40 tapped threaded hole for easy switch adjustment ; Can also be used for retracts, canopies, hatches and doors; Silver Contacts ; Screw Termination ; with mounting holes | $60.00 | $62.40 |
Mini Flux — I found a non-corrosive paste flux that works great for cleaning things before soldering. | $5.00 | $5.20 |
16 to 20 Pin Connector — Still looking for a good one ! | $TBD | $TBD |
Shipping & Handling — we ship anywhere in the world |
||
Shipping and Handling for everything is via US Postal Service, cost TBD for each order. | $TBD |
ALSO, PLEASE NOTE — many ( most? ) of you already know this, but we just learned ( Nov. 2009 ) what the extra credit card “fees” credit card ( CC ) companies / banks are charging us vendors! IF your CC is a company / corporate CC / government CC, a foreign CC, a Rewards CC ( which all CC’s are these days ), and / or your Billing Address for your CC is wrong, and / or your Billing Address is a Post Office Box ( POB ), they charge us vendors an extra 4% !!! Therefore, if you are using one of these type of CC’s, and / or your Billing Address is wrong, and / or it’s a POB, there will be an extra small charge ( sorry ).